154 cities and towns covered
Chimney Relining in Massachusetts
Massachusetts relining divides into two jobs: lining flues that never had a liner at all, and resizing flues that have outlived the appliance they were built for.
Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.
Call about chimney relining
(844) 785-4066Free to use, and there is nothing to pay us. You are never committed to going ahead.
What happens when you call
- You describe the problem and where you are.
- We put you in touch with a licensed contractor covering that area.
- They arrange the visit and agree the price with you directly.
Worth having to hand
- Roughly how old the system is
- What it is doing — or not doing
- Your ZIP code
What to ask for on Chimney Relining
- Stainless liners sized to the appliance
- Insulated where the chimney runs cold
- Unlined colonial flues
- Lifetime-warranted systems
- Licensed & insured We match you with contractors who hold current licensing and cover.
- Know what to ask Every page says what decides the price, so you can judge a quote.
- Free to use We never charge you. Compare quotes and walk away at any point.
- Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.
How it works
Three steps, no obligation at any of them.
-
1
Call and tell us what is wrong
Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.
-
2
A local contractor gets in touch
A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.
-
3
You decide
Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.
What these repairs look like
Illustrative examples of the work described here. More in our disclaimer.
Two different reasons to reline
The first is age. Chimneys built before flue tile was standard are brick with mortar joints and no lining, and after two centuries those joints are frequently gone. Combustion gases then have a route into the chimney structure itself, which is the condition relining exists to fix.
The second is size. A chimney built for a coal furnace, converted to oil and then to gas, is venting an appliance producing a fraction of the flue gas it was designed for. The gases cool, condense, and the acidic condensate works on the masonry from inside. A liner sized to the appliance solves both the corrosion and the draft.
Size comes from the appliance
Diameter is set by the manufacturer's venting tables, not by what fits down the chimney. Smaller than the flue is not the same as correct for the boiler, and it is worth asking to see the table.
When insulation is needed
Exterior stacks, chimneys on unheated walls and long runs all cool the liner enough to condense at the right diameter. Insulation is what prevents it. On an exterior Massachusetts chimney it is generally required rather than optional.
Working on old chimneys
Colonial and Victorian stacks are rarely straight. Offsets, bends, and flues that change section partway up are all common, and they change what relining involves — sometimes requiring the chimney to be opened at the offset and rebuilt afterwards.
Multiple flues in one stack
Centre chimneys frequently carry several flues. Establishing which are live, which are abandoned and whether any are shared has to happen before anyone specifies a liner, and it is a camera job.
Warranty conditions
Good stainless systems carry lifetime warranties conditional on professional installation and annual maintenance. An unregistered or unswept liner is frequently an uncovered one, so ask what the condition actually is.
Chimney Relining — frequently asked questions
Does an unlined chimney have to be lined?
Not automatically — condition and use decide it. Many old unlined Massachusetts flues are still serviceable. What is not acceptable is not knowing, which is what a camera survey resolves.
How long does a stainless liner last?
Good systems are warranted for the life of the home, conditional on correct installation and annual maintenance. Failures in practice come from an appliance the liner was not rated for, or from never being swept.
Can a liner go down a chimney that bends?
Usually — flexible liner handles offsets rigid pipe cannot. A severe offset may require opening the chimney at that point, which changes the cost, and a proper survey establishes it before quoting.
What about cast-in-place liners?
A different tool: poured to form a new flue inside the old one, and it adds structural strength to a deteriorated chimney. It costs more and takes longer, and it suits badly degraded old stacks where stainless alone would not address the masonry.
Will relining change how the fireplace draws?
Usually for the better, because the flue is finally sized for what is venting into it. An oversized flue is a common reason a fireplace has always drawn poorly.
Chimney Relining near you
We cover cities and towns across Massachusetts.