Independent contractors, licensed in MA

Covering 2 ZIP codes

Chimney Relining in Lexington, MA

Massachusetts relining divides into two jobs: lining flues that never had a liner at all, and resizing flues that have outlived the appliance they were built for.

  • Covering 2 Lexington ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about chimney relining in Lexington

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Relining in Lexington, Massachusetts

What to ask for on Chimney Relining in Lexington

  • Stainless liners sized to the appliance
  • Insulated where the chimney runs cold
  • Unlined colonial flues
  • Lifetime-warranted systems
Call about chimney relining
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Lexington. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown recast on a colonial stack in Lexington, MA
Crown recast on a colonial stack Cast, reinforced and projecting past the brick with a drip edge — not a mortar wash troweled flush.
Repointed in matched lime mortar in Lexington, MA
Repointed in matched lime mortar Matched by analysis rather than by eye, because modern hard mortar destroys soft handmade brick.
Liner fitted to an unlined flue in Lexington, MA
Liner fitted to an unlined flue Many pre-tile chimneys are brick and mortar joints only. A stainless liner isolates the structure from combustion gases.

Chimney Relining in Lexington

Equipment in Lexington has to cover a wider range than most of the country asks for — hard winter cold at one end and humid stretches in the eighties and nineties at the other. A system sized for the middle of that range disappoints at both ends of it.

About 22% of homes in Lexington were built before 1940 — old enough to have been built with radiators and no ductwork at all; 35% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Working on old chimneys

Colonial and Victorian stacks are rarely straight. Offsets, bends, and flues that change section partway up are all common, and they change what relining involves — sometimes requiring the chimney to be opened at the offset and rebuilt afterwards.

Multiple flues in one stack

Centre chimneys frequently carry several flues. Establishing which are live, which are abandoned and whether any are shared has to happen before anyone specifies a liner, and it is a camera job.

Warranty conditions

Good stainless systems carry lifetime warranties conditional on professional installation and annual maintenance. An unregistered or unswept liner is frequently an uncovered one, so ask what the condition actually is.

Two different reasons to reline

The first is age. Chimneys built before flue tile was standard are brick with mortar joints and no lining, and after two centuries those joints are frequently gone. Combustion gases then have a route into the chimney structure itself, which is the condition relining exists to fix.

The second is size. A chimney built for a coal furnace, converted to oil and then to gas, is venting an appliance producing a fraction of the flue gas it was designed for. The gases cool, condense, and the acidic condensate works on the masonry from inside. A liner sized to the appliance solves both the corrosion and the draft.

Size comes from the appliance

Diameter is set by the manufacturer's venting tables, not by what fits down the chimney. Smaller than the flue is not the same as correct for the boiler, and it is worth asking to see the table.

When insulation is needed

Exterior stacks, chimneys on unheated walls and long runs all cool the liner enough to condense at the right diameter. Insulation is what prevents it. On an exterior Massachusetts chimney it is generally required rather than optional.

The full guide: everything about chimney relining — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Lexington.

Areas we cover in Lexington

Our Lexington coverage takes in the neighborhoods around Ashland Park, Five Fields, Follen Heights and Meriam Hill.

Chimney Relining in Lexington — FAQs

Do you cover all of Lexington?

Yes — all 2 ZIP codes in Lexington and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How quickly can someone get to me in Lexington?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Lexington?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Does an unlined chimney have to be lined?

Not automatically — condition and use decide it. Many old unlined Massachusetts flues are still serviceable. What is not acceptable is not knowing, which is what a camera survey resolves.

How long does a stainless liner last?

Good systems are warranted for the life of the home, conditional on correct installation and annual maintenance. Failures in practice come from an appliance the liner was not rated for, or from never being swept.

Neighborhoods we cover in Lexington

Chimney work across Lexington and the areas around it.

  • Ashland Park
  • Five Fields
  • Follen Heights
  • Meriam Hill
  • Merriam Hill Area
  • Munroe Hill
  • Turning Mill Area
  • Woodhaven Neighborhood
Call now How it works