Independent contractors, licensed in MA

Covering 2 ZIP codes

Fireplace Repair in Beverly, MA

The firebox takes direct flame and fails before anything else. Open joints and cracked brick let heat reach what is behind the masonry, which makes this safety work.

  • Covering 2 Beverly ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about fireplace repair in Beverly

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Fireplace Repair in Beverly, Massachusetts

What to ask for on Fireplace Repair in Beverly

  • Firebrick replacement in refractory mortar
  • Smoke chamber and throat repair
  • Historic and Rumford firebox work
  • Factory-built panel replacement
Call about fireplace repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Beverly. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown recast on a colonial stack in Beverly, MA
Crown recast on a colonial stack Cast, reinforced and projecting past the brick with a drip edge — not a mortar wash troweled flush.
Repointed in matched lime mortar in Beverly, MA
Repointed in matched lime mortar Matched by analysis rather than by eye, because modern hard mortar destroys soft handmade brick.
Liner fitted to an unlined flue in Beverly, MA
Liner fitted to an unlined flue Many pre-tile chimneys are brick and mortar joints only. A stainless liner isolates the structure from combustion gases.

Fireplace Repair in Beverly

Much of Beverly's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.

About 33% of homes in Beverly were built before 1940 — old enough to have been built with radiators and no ductwork at all; 27% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Masonry fireboxes

A masonry firebox is firebrick laid in refractory mortar, both specified for flame contact. Ordinary mortar will not survive there and crumbles within a season, which is why a firebox repointed with the wrong material fails again quickly.

The back wall takes the most heat and goes first. Once joints are open, heat and combustion gases reach the masonry behind, and beyond that is framing.

Historic fireboxes are worth keeping

Massachusetts has a great many genuinely old fireboxes, some of them shallow angled Rumford designs that throw heat into the room far better than a deep box. Those are worth repairing properly rather than replacing with something modern, and they need someone who recognizes what they are looking at.

What to look for

Joints you can get a blade into, cracked or missing firebrick, gaps at the back corners, and soot staining on the wall above the opening — which points at the throat or smoke chamber as well.

Factory-built units are a different repair

A zero-clearance fireplace is a manufactured metal appliance with refractory panels, installed into a framed chase. It has a model number and a parts list, and a cracked panel is replaced with that manufacturer's component.

Patching a factory panel with mortar is a fire risk and voids the listing, and it is done constantly because the panels look like masonry to anyone who does not know.

Telling them apart

A metal label inside the firebox or on the frame means factory- built. Smooth panels rather than individual bricks is the other giveaway.

When parts are discontinued

Older units sometimes have no parts available. The honest options are then a modern insert vented through a liner, or rebuilding — not a patched panel.

The full guide: everything about fireplace repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Beverly.

Areas we cover in Beverly

Our Beverly coverage takes in the neighborhoods around Beverly Cove, Carisbrook, Downtown and Dunolly.

Fireplace Repair in Beverly — FAQs

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Is chimney waterproofing worth doing?

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

What qualifications should a Beverly chimney company have?

Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.

Can you work on a rental or multi-family property in Beverly?

Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.

Is an insert worth considering?

Often, particularly on an open masonry fireplace that loses more heat than it gives. It needs a liner sized to the appliance as part of the installation.

Can we use it while waiting for repair?

Not with open joints or cracked brick — that is the condition the repair exists to remove.

Neighborhoods we cover in Beverly

Chimney work across Beverly and the areas around it.

  • Beverly Cove
  • Carisbrook
  • Downtown
  • Dunolly
  • Majorca
  • Maryborough West
  • Montseratt
  • Riverbank
  • Ryal Side
  • Talbot
Call now How it works